![Your Pond Pros | F500F 1 HP Bearon Aquatics Power House Pond Aerating Fountain in use in pond](http://www.yourpondpros.com/cdn/shop/files/phfarm_1280x_749e5b6d-eaff-4dac-afd2-b737fd5f8259_1128x1128.webp?v=1684761937)
888-825-6214
 F500 | 1/2 HP |
1 HP |
---|---|---|
Volts/Amps:Â |
115 volt-Â 5 Amps |
115 volt-Â 7 Amps |
Minimum Water Depth: | 14Â Inches | 17Â Inches |
Water Flow: |
106 Gallons Per Minute (GPM) |
130 Gallons Per Minute (GPM) |
Spray Height: | 4 Feet | 6 Feet |
Spray Width: | 15 Feet | 21 Feet |
Cord Lengths (ft): | 50, 100, 150, 200 | 50, 100, 150, 200 |
MINIMUM DEPTH: | 21 Inches | 21 Inches |
Weight | 60 lbs |
---|---|
Dimensions | 11 Ă— 9 Ă— 8 in |
Voltage |
115V, 230V |
Cord |
50', 100', 150', 200', 300', 350' |
Â
• 1 HP aerating fountain motor with circular "V-pattern".
• Heavy-duty fountain float made of 15-year UV resistant ABS plastic with a custom opening to support shroud and motor assembly.
• Heavy-duty custom brackets attach motor housing to PVC shroud and side ports for maximum water flow.
• Water resistant power cord. Cords available from 50' - 400' depending on voltage model.
• (2) 25' Mooring Lines of 3/8" braided nylon rope and (2) eye bolts.
• Motor assembly consists of 16-gauge stainless steel motor housing, electric motor, start/run components, seals, and dielectric lubricating fluid. The end bell is made of cast bronze for corrosion-free operation in either fresh or saltwater. Just add Aluminum Anode for saltwater applications.
Â
 F500 | 1/2 HP |
1 HP |
---|---|---|
Volts/Amps:Â |
115 volt-Â 5 Amps |
115 volt-Â 7 Amps |
Minimum Water Depth: | 14Â Inches | 17Â Inches |
Water Flow: |
106 Gallons Per Minute (GPM) |
130 Gallons Per Minute (GPM) |
Spray Height: | 4 Feet | 6 Feet |
Spray Width: | 15 Feet | 21 Feet |
Cord Lengths (ft): | 50, 100, 150, 200 | 50, 100, 150, 200 |
MINIMUM DEPTH: | 21 Inches | 21 Inches |
Weight | 60 lbs |
---|---|
Dimensions | 11 Ă— 9 Ă— 8 in |
Voltage |
115V, 230V |
Cord |
50', 100', 150', 200', 300', 350' |
Â
• 1 HP aerating fountain motor with circular "V-pattern".
• Heavy-duty fountain float made of 15-year UV resistant ABS plastic with a custom opening to support shroud and motor assembly.
• Heavy-duty custom brackets attach motor housing to PVC shroud and side ports for maximum water flow.
• Water resistant power cord. Cords available from 50' - 400' depending on voltage model.
• (2) 25' Mooring Lines of 3/8" braided nylon rope and (2) eye bolts.
• Motor assembly consists of 16-gauge stainless steel motor housing, electric motor, start/run components, seals, and dielectric lubricating fluid. The end bell is made of cast bronze for corrosion-free operation in either fresh or saltwater. Just add Aluminum Anode for saltwater applications.
Â